کنفرانس بین المللی ماشین و محرکه های الکتریکی

صفحه اصلی / The 4th International Conference on Electrical Machines and Drives

A New Hybrid Y-Type Rotor Topology for High-Performance Coaxial Magnetic Gear

نویسندگان :

Mojtaba Malakooti Khaledi¹ Seyed Ahmadreza Afsari Kashani²

1- University of Kashan 2- University of Kashan

کلمات کلیدی :

Coaxial magnetic gear،torque density،ferrite،rare earth magnet،finite element analysis،genetic algorithm

چکیده :

In recent years, magnetic gears (MGs) have seen unprecedented development and numerous novel designs have been proposed because of their contactless characteristic and low noise and vibration. Yet, the expense of using magnetic gears may be a deterrent in small-scale industrial applications. The extensive usage of pricey neodymium or samarium cobalt magnets is the main cause of the high cost of magnetic gears. In low-frequency applications, ferrite permanent magnets present minimal eddy current losses and are affordable and widely accessible. Compared to most modern magnets, ferrite has a substantially lower energy (BHmax). Using two different kinds of magnets at the same time is an effective technique to obtain high energy and reduce costs. This paper presents the analysis of a coaxial magnetic gear that simultaneously employs rare-earth and ferrite magnets in its structure. The proposed structure is optimized by ANSYS Maxwell 2021-R1 finite element software and genetic algorithm.

لیست مقالات

لیست مقالات بایگانی شده

کاهش ریپل گشتاور در درایو ماژولار موتور سنکرون آهن ربای دائم سنکرون دوازده فاز با سیم پیچی دوبل استاتور

داوود ملکی - ابوالفضل حلوایی نیاسر

Real-time temperature estimation of permanent magnets in a PMSM using a hybrid ANN and Lumped-Parameters Thermal Network

Mohammadreza Bagheri - Alireza Shokripour - Teymoor Ghanbari - Ebrahim Farjah

Strength analysis of the bushing system supporting set for a medium power turbo-generator using the multiphysics method

Saeed Rostami - Peyman Shoreshi - Mohsen Nikfar

Performance Evaluation of a SSSR AFPM Motor Through 3D-FEA and Experimental Validation for Electric Dump-Truck

Elham Rahimi Namaghi - Aghil Ghaheri - Babak Sallak - Mehrdad Ghafari - Mostafa Eftekharizadeh

A New Methodology for Design Optimization of Interior Permanent Magnet Motors for Electric Vehicle Applications

Farshad KIANI - Hamed Tahanian

A Data-Driven Optimization Framework for Sustainable Electric Vehicle Charging with Grid Stability and Renewable Energy Integration

Bagher Khademhamedani - Masoud Izadi - Nahid Izadi

Power Transformers Short Circuit Impedance Calculation Using Energy Method Based on Leakage Flux

Ashkan Teymouri - Behrooz Vahidi

A Comprehensive Review on charger of Electric Vehicle

Faegheh Esmaeili

Reverse Rotor Pole Construction in Axial-Field Flux-Switchnig PM Machine with High-Torque and Low-Cogging Torque

Hamid Ebrahimi - Hossein Torkaman - Alireza Sohrabzadeh - Alireza Jaferian-Fini - Hamid Javadi

Investigation of Low-temperature Ethylene Production of Transformer Oil Using New IEC Method

Nima Ajodani-Zanjani - Hossein Karami - Gevork B.Gharehpetian - Arash R. Khoshrou

بیشتر

ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 42.3.2