0% Complete
|
ورود به سامانه
|
ثبت نام
صفحه اصلی
/
icemd2024
Sensorless Drive of SynRM using Sliding Mode Observer based on Maximum Torque per Ampere Control Approach
نویسندگان :
Hadi Ghorbani
1
Roozbeh Asad
2
Farzad Bodaghi
3
1- Iran University of Science and Technology
2- Iran University of Science and Technology
3- Department of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran
کلمات کلیدی :
synchronous reluctance motor (SynRM)،sliding mode observer (SMO)،maximum torque per ampere (MTPA
چکیده :
This paper presents a high-performance sensorless control scheme for synchronous reluctance motors (SynRM) drive using sliding mode observer (SMO) for rotor position and speed estimation. The SMO is designed based on back electromotive force (Back-EMF) components of the SynRM in the stator reference frame. The stator currents and voltages components in the stationary reference frame are received as inputs of the SMO and estimated rotor position and speed are provided from estimated Back-EMF components as outputs of the observer. Moreover, in order to improve the efficiency of the overall drive system, a loss minimization approach called maximum torque per ampere (MTPA) is used in order to reduce the rotor chopper losses when operating in steady-state. Finally, simulation results are taken from MATLAB/SIMULINK to confirm the effectiveness of the sensorless control system for SynRM with SMO.
لیست مقالات
لیست مقالات بایگانی شده
Model predictive Control for Torque Ripple Reduction in Brushless DC Motor fed with five level CHB Inverter with low complexity
Zahra Emami - Abolfazl Halvaiee
Direct Torque and Flux Control of Synchronous Reluctance Motor Drives in the Rotor Reference Frame Using Normalized Deviation Equations
Hossein Abootorabi Zarchi - Ahmadreza Bagheri Mohagheghi - Xiaodong Liang
توسعه نرمافزار محاسبه سختی یاتاقانهای غلتشی
سمیرا کاویانی - زهره محمدی - علی قاهری
Transformative Control Optimization in PMSG-Based Wind Energy Systems: A Deep Reinforcement Learning Approach
Bagher Khadem Hamedani - Masoud Izadi - Nahid Izadi - Amin Azarshab - Ali Najari - Behnam Zaker
Identification of Brushless DC Motor Parameters Using Meta-Heuristic Techniques
Amirhossein Sadeghi-Bahmani - Ramin Alipour-Sarabi
Torque Profile Optimization of New Hybrid Reluctance Motor Using DOE Response Surface Methodology
Mohammad-Ali Mahmoudpour - Ali Harooni - Mojdeh Hossein Nejadi - Aghil Ghaheri - Ebrahim Afjei
A Brief Review on the Application of Machine Learning for Transient Stability Prediction of Synchronous Generators to Proposing a Comparative Framework
Ali Abdalredha - Alireza Sobbouhi - ابوالفضل واحدی
Electromagnetic Sensor Behavior Prediction Using LSTM Neural Network for Enhanced Accuracy and Reliable Performance
Ahmad Saasni - Mehrdad Ghafari - Mostafa Eftekharizadeh
آنالیز عددی و تحلیلی جداساز لرزه ای برای ترانسفورماتورهای قدرت
سعید بیگدلی - سعید نصیری
3D FE modeling and calculation of electromagnetic torque and eddy current loss in the end region of large synchronous generators
Moein Farhadian - Farshad KIANI - AmirAbbas Vahaj - Hamed Tahanian
ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 40.4.2