0% Complete
صفحه اصلی
/
The 3rd International Conference on Electrical Machines and Drives
Design of Dual-Rotor Dual-Stator Axial-Field Flux-Switching PM Motor with Low-Cogging Torque and Low-Torque Ripple
نویسندگان :
Fariba Farrokh
1
Hossein Torkaman
2
Abolfazl Vahedi
3
Mahdi Banejad
4
1- دانشگاه صنعتی شاهرود
2- دانشگاه شهید بهشتی
3- دانشگاه علم و صنعت ایران
4- دانشگاه صنعتی شاهرود
کلمات کلیدی :
dual-stator axial field flux-switching machine،high-torque density،low-torque ripple،low-cogging torque،traction applications
چکیده :
In this paper, the dual-rotor dual-stator axial field flux-switching PM (DR-DS-AFFSPM) topology is presented, designed, and analyzed to improve the cogging torque and torque ripple. The 12-pole dual-stator has been located on both sides of the 10-pole internal dual-rotor and phase-group concentrated-coil windings for the aim of increasing fault-tolerant capabilities. The 3D finite element method (3D-FEM) analysis is utilized for determining the main characteristics, such as the magnetic field distribution, the flux-linkage, back electromagnetic force, the cogging torque, the output torque, the torque ripple, and the losses in the internal dual-rotor DS-AFFSPM motor. A comparative analysis in the same condition is thoroughly made of the designed topology and related topology in literature, in order to determine the most effective structure such as traction applications based on torque density, torque ripple, cogging torque, and efficiency. The results show that, the low-cogging torque, low-torque ripple, high-torque density, and high-efficiency, of the internal dual-rotor DS-AFFSPM topology is a suitable candidate for traction applications.
لیست مقالات
لیست مقالات بایگانی شده
Study of Flux Switching Machine Rotors from EMF Harmonic Components Point of View for Direct Drive wind power Application and Design of a new Topology with Double Rotor & Toroidal Coil
Rouhollah Rouhani - Alireza Rouhani
تحلیل عیب ناهم محوری از نوع ترکیبی در ماشین شارمحوری آهنربای دائم بدون هسته
فاطمه اسلامی - مصطفی شاه نظری
Total Stator Copper Loss Calculation in large Synchronous Generators with Hybrid Modeling
AmirAbbas Vahaj - Hamed Tahanian
A Novel Solid-State Fault Current Limiter Based on AC and DC Reactors for Using in Microgrids
Mehdi Firouzi - Morteza Hesami
Improving the performance of Permanent-Magnet Assisted Synchronous Reluctance Motor used in electric vehicles
Seyed Davood Hoseini robat - ُُSeyed Ebrahimُُُُ Afjei
Surrogate and Correlation- based Optimization of Out-Rotor PMSM: A Case Study on e-Bike with Enhanced Halbach Array
Ali Amini - Hamidreza Haghighat - Abolfazl Vahedi
Partial Discharge Pulse Shape Characteristics as a Tool for Diagnosing Insulation Faults on High Voltage Rotating Machines
Asghar Akbari azirani - Mohammad Rahimi - Azadeh Mohsenian
توسعه نرمافزار محاسبه سختی یاتاقانهای غلتشی
سمیرا کاویانی - زهره محمدی - علی قاهری
A New Hybrid Y-Type Rotor Topology for High-Performance Coaxial Magnetic Gear
Mojtaba Malakooti Khaledi - Seyed Ahmadreza Afsari Kashani
A 12/7 Segmented Outer Rotor FSPM Motor with Improved Performance
Sadegh Mollaei Saghin - Aghil Ghaheri - Ali Harooni - Ebrahim Afjei
بیشتر
ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 41.5.3