کنفرانس بین المللی ماشین و محرکه های الکتریکی

صفحه اصلی / The 3rd International Conference on Electrical Machines and Drives

Torque Ripple reduction of BLDC Motor Drive using Finite-Control-Set Model Predictive Control Strategy

نویسندگان :

Zahra Emami¹ Abolfazl Halvaee²

1- دانشگاه کاشان 2- دانشگاه کاشان

کلمات کلیدی :

BLDC motor

چکیده :

Brushless DC (BLDC) motor is the first choice for lightweight electric vehicles because of its high torque, high power density, and compatible speed range. The vehicle environment is very dynamic, nonlinear, and noisy. This paper provides a comparative study between two control schemes of BLDC motors: the speed control scheme using a model predictive control (MPC) approach and the stator current controlled scheme using hysteresis current controllers. Proposed MPC method does not require Hall sensors and uses the position sensor for gaining the values of the back-emf waveforms The two systems were studied and investigated under the same operating conditions. Qualitative and quantitative analyses were performed on the results obtained with each control scheme. the simulations illustrate that the proposed model predictive torque controller performs better than the traditional current controller.

لیست مقالات

لیست مقالات بایگانی شده

An Impedance-Source Dual Bridge Converter

Taher Hemmati - Hossein Torkaman - Soheyl Khosrogorji - Milad Babalou

Comparison of Synchronous Reluctance and Inter-Modular Biased-Flux Stator Permanent Magnet Motors

Mohammad Amirkhani - Mohammad Afrank - Mojtaba Mirsalim

Optimum Selection of Distribution Transformers for Tropical Regions Considering Thermal Aging

Hossein Amini - Mohammad Hamed Samimi - Amir Abbas Shayegani Akmal

Torque Profile Optimization of New Hybrid Reluctance Motor Using DOE Response Surface Methodology

Mohammad-Ali Mahmoudpour - Ali Harooni - Mojdeh Hossein Nejadi - Aghil Ghaheri - Ebrahim Afjei

Analysis of Short-Circuit Fault Types in Switched Reluctance Generators for Low-Power Wind Turbine Applications

Emad Mirzaei - Hossein Torkaman - Milad Babalou

A Numerical Method for Prediction of Standard Partial Discharge Test Performance of An Open-Ventilated Dry-Type Transformer at Design Stage

Mohammad Qumi - Mahdi Kazemiun - Mehdi Vakilian

Partial Discharge Pulse Shape Characteristics as a Tool for Diagnosing Insulation Faults on High Voltage Rotating Machines

Asghar Akbari azirani - Mohammad Rahimi - Azadeh Mohsenian

Improving the Water Jacket Cooling for Flywheel Energy Storage Systems: An Investigation on the Potting and Polyamide-imide/Boron Insulators

Hossein Azizi Moghaddam - Tohid Sharifi

Open-Circuit Fault Diagnosis of Fault-Tolerant DAB Converter for Improving Smart Transformers Reliability using 1-D CNN

Peyman Sheikh Ghomi - Milad Babalou - Hossein Torkaman

Calculation of the Air-Gap Field Distribution in Surface-Mounted Permanent-Magnet Synchronous Motors Using the Finite Difference Method

Ali Jamali-Fard - Mojtaba Mirsalim

بیشتر

ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 42.3.2