0% Complete
|
ورود به سامانه
|
ثبت نام
صفحه اصلی
/
icemd2024
A Comparative Analysis of Two Different Types of Permanent Magnet Motors with Outer-Rotor Structure for Direct Drive Applications
نویسندگان :
Amir Ebrahimi Shohani
1
Mohammad Ardebili
2
Karim Abbaszadeh
3
1- دانشگاه صنعتی خواجه نصیرالدین طوسی
2- دانشگاه صنعتی خواجه نصیرالدین طوسی
3- دانشگاه صنعتی خواجه نصیرالدین طوسی
کلمات کلیدی :
flux switching machines،vernier machines،outer rotor،permanent magnet،direct drive applications
چکیده :
Abstract—In this paper, an electromagnetic performance comparison is conducted between an outer-rotor flux-switching permanent magnet motor (FSPM) and an outer-rotor permanent magnet vernier motor (PMV) for direct drive systems. Both motors employ the same stator and rotor pole pairs, an identical double-layer concentrated winding, and have almost the same volume of PMs and steel laminations. Also, the configuration and main principles are clarified. Then, a comparative analysis of both motors is presented using 2-D finite element analysis (FEA). According to the results, in terms of cogging torque, the PM vernier motor performs better than the FSPM motor, while in terms of back-EMF, output torque, torque ripple, total loss, and efficiency, the FSPM motor shows better performance.
لیست مقالات
لیست مقالات بایگانی شده
A Comparision Between PID-PSO and Fuzzy-PID Controllers for Controlling a DC Motor Fed with a Buck-Boost Converter with Continuous Input Current and Semi-Quadric Voltage Gain
Nasim Moradmatak - Seyed Hamid Shahalami
A Comparative Analysis of Two Different Types of Permanent Magnet Motors with Outer-Rotor Structure for Direct Drive Applications
Amir Ebrahimi Shohani - Mohammad Ardebili - Karim Abbaszadeh
Comparative Study of Shield Placement to Mitigate the Stray Loss of Power Transformers Based on 3D-FEM Simulation
Mahsa Taghilou - Mojtaba Mirsalim - Morteza Eslamian - Ashkan Teymouri
The effect of Stator/Rotor Bifurcations on a PMaSynRM Torque Ripple
Ahmed Sultan - Seyed Ehsan Abdollahi - Sayyed Asghar Gholamian
A Numerical Method for Prediction of Standard Partial Discharge Test Performance of An Open-Ventilated Dry-Type Transformer at Design Stage
Mohammad Qumi - Mahdi Kazemiun - Mehdi Vakilian
Multiphysics Analysis of the End winding Support System for a Medium Power Air-Cooled Turbo-generator
Behzad Bahrami Joo - Mojtaba Dehghani - Mohsen Nikfar
A New Method for Fast and Accurate Calculation of Saturation Curves for Large Synchronous Generators
Farshad Kiani - Hamed Tahanian
Improving the performance of Permanent-Magnet Assisted Synchronous Reluctance Motor used in electric vehicles
Seyed Davood Hoseini robat - ُُSeyed Ebrahimُُُُ Afjei
Cogging Torque Reduction in AFPM Machines using Sinusoidally Shaped Magnets
Naghi Rostami
A transfer learning based CNN for dynamic security assessment with small datasets and unknown data
ساسان آزاد - Nazanin Pourmoradi - Mohammad Taghi Ameli
ثمین همایش، سامانه مدیریت کنفرانس ها و جشنواره ها - نگارش 40.4.2